斷橋鋁數控彎弧機
聯系人：馬經理：13358076461 林經理13912858839
產品名稱
斷橋鋁數控彎弧機產品簡介
斷橋鋁數控彎弧機，也叫彎弧機、數控彎弧機。配備專用模具，可加工各種國標，非標鋁型材，所有材料一次成型。尤其解決了加工難度斷橋鋁材的彎弧工藝問題。
卷彎是一種先進的冷彎工藝，各種噴涂、電泳、電鍍、拉絲等經過表面處理的型材可以直接彎曲，不會出現普通壓彎一樣產生的波浪、折線和劃痕。設備廣泛應用于建筑門窗、幕墻、陽光棚等多種行業。
產品圖片
產品特點
◎用料省——理論計算需要多少材料，實際生產過程就需要多少，無料廢。
◎范圍大——可以加工扁鋼、方鋼、圓鋼、角鋼、I型鋼、H型鋼、方管、矩形管、圓管等不同型材，不同型號。
◎周期短——加工工藝簡單、科學，只要更換模具就能加工不同的材料。
◎冷彎法——比起熱彎不會改變材料特性，且能降低生產成本。
◎卷彎法--次上料可完成型材的預彎、卷圓和校圓工序，有效降低料廢。
◎卷角鋼——保證90°垂直，且向內向外均無浪紋產生。
◎彎管材——根據客戶需要制作各種有難度的形狀。
◎C形管——可通過帶鋼一次加工成形。
The winding is a kind of advanced cold bending, and its characteristics are as following:
Save material: Material volume needed for actual production is the same as theoretical calculation. No material waste.
Wide range: may be used to bend different material with different model, such as flat steel, square steel, round steel, angle steel, U-steel,H-steel square tube, rectangular tube, rond tube, etc.
Short cycle: simple and ideal bending process. Different materials can be bended only by replacing the mole.
Cold bending: Compared with hot bending, cold bending will not change material properties, and cam save production cost.
Rolling method: Per-bending, rolling, and correction can be finished only after one—time feeding, and can greatly save material.
Angle steel rolling: Ensure 90 degrees vertical, and no ripple defect both in-turn and out-trun.
Tube bending: Various complicated shapes can be bended as per customers' needs.
C-tube: one-time forming with strip steel to bend.
